Vermette - 512A - 512A Portable Material Lift Non-Motorized

MODEL 512A - OSHA ACCEPTED

MODEL 512A will lift 500 lbs. up to 12 ft. high (14 ft. with optional height extension). It can also be converted to a 5, 8, or 9 ft. lift by simply removing or replacing the 3 and 4 ft. slip-joint post section. As a 5 ft. lift, this model will pass through a doorway exceeding 29" wide x 7' high. 2 ft. post sections shown on specifications page are used for intermediate heights.

The platform of the MODEL 512A is 20" wide by 24" long. Load center spaced on 12"
from post. Capacity is decreased on loads extending over 12" center distance. Loads over 500 lbs. can be lifted with two or more units.

When the MODEL 512A is assembled as a 5 ft. lift, it can be tipped back on the corrugated handle and rolled into a truck or Van.

WARNING: DO NOT USE EXTRA POSTS TO INCREASE THE DESIGN MAXIMUM HEIGHT OF 12 FEET ON THE 512A LIFT.

MODEL 512 A SPECIFICATIONS

• CAPACITY 500 lbs.
• Base Overall Length 60 1/2"
• Base Overall Width 29"
• Base Overall Width w/Outriggers Extended 81"
• Overall Height 13' 10"
• Overall Lifting Height 12'
• Platform 24"x 20"