Tempstar - RHS090L0AA0AAT - 7.5 Ton Rooftop Heat Pump Package Unit R-410a

Item: RHS090L0AA0AAT
loading availability
Loading price
/ EA



Built to Last, Easy to Install and Service
  • One-piece, single-packaged heat pump units that are prewired, tested, and charged at the factory
  • Single stage cooling on 3 to 6 ton models, 2 stage cooling on 7.5 to 12.5 ton.
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • All units are convertible from downflow to horizontal air flow; no special adapter curbs are necessary on 3 to 10 ton models, supply duct kit required for 12.5 ton model only.
  • Copper tube aluminum fin coils with optional corrosion resistant coils
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed orifice metering devices on all models to precisely control refrigerant flow
  • Outdoor temperature cooling operation range up to 115°F (46°C) and down to 25°F ( -4°C )
  • Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
  • Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
  • Fully insulated cabinet
  • Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressor.
  • Dependable time/temperature defrost logic provides a defrost cycle, if needed, every 30, 60, 90, or 120 minutes and is adjustable
  • Scroll compressors with internal line-break overload protection
  • All units have high and low pressure switches
  • Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
  • Precision sized suction line accumulator to provide high reliability
  • 4-way reversing valve rapidly changes the flow of refrigerant to quickly changeover from cooling to heating and heating to cooling
  • Belt drive evaporator-fan motor and pulley combinations available on all sizes to meet any application
  • Direct drive high efficiency blower motor on 3 to 5 ton models, belt drive optional
  • Crankcase heaters on all models but the 3 ton
  • Newly-designed indoor refrigerant header for easier maintenance and replacement
  • “No-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal.
  • Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
  • Provisions for thru-the-bottom power entry capability
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Single point electrical connections
  • 5 Year compressor limited warranty
  • 1 Year parts limited warranty

California residents: see Proposition 65 Warning

Features and Specification

Weight 885.000000
Phase Three
Refrigerant R-410A
Number of Fan Blades 2
Product Family RHS
Length 88.125000
Metering Device Orifice - Fixed Metering Device
Width 59.500000
Warranty Offered No
Voltage 460 VAC
Sound Level (dBA) 82
Stage Two
Tonnage 7.5
UL Listed Yes
UPC See Optical
Condenser Motor RPM 1100
Height 49.375000
Color Gray
Circuit Breaker - Max Amps 20
CFM Cooling 2250-3750
Brand Tempstar
Heating Capacity 48000-86000
Blower Motor Type Fixed Torque
Blower Motor Speeds 2 (Two)
Blower Motor RPM 460-652
Blower Motor HP 1 1/5 BHP
Air Flow Convertible
Blower Wheel 15" x 15"
Compressor Scroll
Filter Size (6) 20" x 20" x 2" RA Filter, 20" x 24" x 1" OA Filter
ETL Listed No
Equipment Type Heat Pump
Electric Heat Range [kW] 13.9-41.7
EER 11.2
Energy Star Rated No
Drive Type Belt
COP 3.4
Condenser Motor HP 1/4 HP
Condenser Motor Speeds 1 (Single)
Cooling Capacity 88000
Condenser Motor Type Direct Drive
Cubic Measurement 149.823300
Cycle/Hertz 60 Hz
Drain Connection Size 3/4"

Parts List


picture_as_pdf specification sheet

picture_as_pdf warranty document