Tempstar - RGH090LDCA0AAT - 7.5 Ton Gas Heating/Electric Cooling Single Package Rooftop Unit R-410a

loading availability
Loading price
/ EA


R-410A SINGLE PACKAGE ROOFTOP 3 Thru 12.5 TONS (1 & 3-Phase)

Built to Last, Easy to Install and Service
  • R-410A HFC refrigerant
  • ASHRAE 90.1 energy compliant and Energy Star qualified
  • Single-stage cooling capacity control on all 036-072 models
  • Two-stage cooling capacity control on 090 -150 models.
  • Rated in accordance with AHRI Standard 210/240 (036-060 sizes) and 340/360 (072-150 sizes)
  • Designed in accordance with Underwriters’ Laboratories Standard 1995
  • Listed by UL and UL, Canada or ETL, ETL Canada
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Gas efficiencies up to 82%
  • Induced draft combustion
  • Redundant gas valve, with 1 or 2 stages of heating Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • TXV refrigerant metering device on each circuit. Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
  • “Low NOx” models available that meet California Air Quality Management NOx requirements and include stainless steel heat exchangers
  • Cooling operating range from 35 F up to 125 F. 110 size model standard cooling operation down to 0ºF (-18ºC)
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Belt drive evaporator-fan motor and pulley combinations available on all three phase models
  • Direct Drive x13 (5 speed/torque) motor on 036 to 060 models
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field convertible from vertical to horizontal airflow on all models. No special kit required on 036-120 models. Supply duct kit required for 150 size model only.
  • Provisions for thru-the-bottom power entry capability Single point gas and electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection
  • Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed, shaft down condenser motors
  • Low pressure, freeze protection, and high pressure switches
  • Exclusive IGC anti-cycle protection for gas heat operation
  • Solid-state electronic direct spark ignition system
  • Liquid line filter drier
  • 15 Year limited warranty on optional stainless steel heat exchanger
  • 10 Year limited warranty on aluminized heat exchanger
  • 5 Year compressor limited warranty
  • 1 Year parts limited warranty

California residents: see Proposition 65 Warning

Features and Specification

Weight 925.000000
Product Family RGH
Height 49.375000
Phase Three
Number of Fan Blades 2
Length 88.125000
Metering Device TXV/TEV - Thermostatic Expansion Valve
Refrigerant R-410a
Voltage 460 VAC
Tonnage 7.5
Sound Level (dBA) 82
Stage Two
UL Listed Yes
UPC See Optical
Warranty Offered Yes
Width 59.500000
Heating Capacity 73000, 73000-103000
Condenser Motor HP 1/4 HP
Circuit Breaker - Max Amps 25
CFM Cooling 2250, 2250-3750
Brand Tempstar
Blower Wheel 15" x 15"
Blower Motor Type Fixed Torque
Blower Motor Speeds 2 (Two)
Blower Motor RPM 690, 690-936
Blower Motor HP 2 2/5 BHP
Air Flow Downflow / Horizontal
Color Gray
Drive Type Belt
Filter Size (4) / 20" x 20" x 2" RA Filter, (1) / 20" x 24" x 1" OA filter
ETL Listed Yes
Equipment Type Gas Electric
Energy Star Rated Yes
EER 12
Condenser Motor Speeds 1 (Single)
Drain Connection Size 3/4"
Condenser Motor RPM 1100
Compressor (2) Scroll
Condenser Motor Type Direct Drive
Cooling Capacity 89000
Cubic Measurement 149.823300
Cycle/Hertz 60 Hz