Tempstar - RAS180H0CA0AAT - 15 Ton R-410A Single Packaged Rooftop A/C Unit

Item: RAS180H0CA0AAT
loading availability
Loading price
/ EA


3 THRU 15 TONS (1 & 3-Phase)

  • One-piece, standard efficiency electric cooling with a low profile, prewired, tested, and charged at the factory
  • Field Convertible from vertical to horizontal airflow on all models. No special kit required on 036-150 models. Field accessory supply duct kit required for 180 size model only.
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fully insulated cabinet
  • Single-stage or two stage cooling capacity control
  • Single or dual scroll compressor with internal line-break overload protection
  • All units have high and low pressure switches
  • Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
  • Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
  • Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
  • Newly-designed indoor refrigerant header for easier maintenance and replacement
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Belt drive evaporator-fan motor and pulley combinations available to meet any application
  • Access panels with easy grip handles provide quick and easy access to the blower and blowe rmotor, control box, and compressor.
  • “No-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal.
  • Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 115°F (46°C) and down to 40°F ( 4°C ) using winter start kit
  • Fixed orifice metering devices on all models to precisely control refrigerant flow
  • Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
  • Standard, medium and high static fan motor options available
  • Capable of thru-the-base or thru-the-curb electrical routing
  • Single point electrical connections
  • 5 Year limited warranty on compressor
  • 5 Year limited warranty on electric heater parts
  • 1 Year limited warranty on parts

California residents: see Proposition 65 Warning

Features and Specification

Weight 1305.000000
Prop 65 Yes
Stage Two
Sound Level (dBA) 87
Refrigerant R-410A
Product Family RAS
Phase Three
Length 115.875000
Package Weight 1310.000000
Number of Fan Blades 2
Tonnage 15
UL Listed Yes
AHRI - Usage Packaged
Evaporator Coil Metering Device Orifice - Fixed Metering Device
UPC See Optical
Voltage 208-230 VAC
Width 63.375000
Compressor (2) Scroll
Height 57.375000
Circuit Breaker - Max Amps 80
CFM Cooling 4500-7500
CFM Condenser Fan 0
CBU - Compressor Bearing Unit Yes
Condenser Motor HP 1/4 HP
Brand Tempstar
Blower Wheel 18" x 18"
Blower Motor Type Fixed Torque
Blower Motor RPM 627-851
Blower Motor HP 3 7/10 BHP
Air Flow Convertible
Color Gray
Blower Motor Speeds 2 (Two)
Condenser Motor RPM 1100
Condenser Motor Speeds 1 (Single)
Filter Size (6) 18" x 24" x 2" RA Filter, (2) 24" x 27" x 1" (vert.), 30"x 39"x 1" (horiz.) OA Filter
Fan Diameter 22
Equipment Type Straight Cool
Electric Heat Range [kW] 16.5-67
EER 11
Energy Star Rated No
Drive Type Belt
Cubic Measurement 243.829700
Condenser Motor Type Direct Drive
Drain Connections 2
Cooling Capacity 174000
Cycle/Hertz 60 Hz
Drain Connection Size 3/4"

Parts List