The 700 Millivolt Gas Valves Are Wall Thermostat Actuated Combination Gas Valves. These Controls Combine A Manual Gas Cock, Automatic Pilot Safety Valve and A Millivolt Operator.
The Automatic Pilot Safety Is Separate From The Gas Cock and Provides Gas Shutoff In Case Of Pilot Outage.
Regulated and Non-Regulated Models Are Available.
Standard Features Include: Pilot Outlet, Pilot Gas Filter and Pilot Adjusting Key.
Valves Can Be Mounted In Any Position Except Upside Down. Consult or dering Chart For Individual Control Specifications.
Important Wiring Information *Most Appliances Manufactured In The USA and Canada Are Manufactured To Meet The Standards Set Forth By The American National Standards Institute (ANSI). A Revision In The Standards "Mis-Wiring Requirements For Gas Valves" Was Effective January 1, 1996. The Reason For This Standard Was So That You As A Service Technician Could Disconnect The Gas Valve Wires and Reconnect Them Without Making A Mistake. Therefore All Robertshaw Millivolt Gas Valves Now Meet The New Standard. The 700-500 Series Millivolt Gas Valves Have A 1/4" Quick Connect Terminal and A 3/16" Quick Connect Terminal On The Terminal Block. There Is No Terminal Screw (Or Threads) On The Side That Has The 3/16" Terminal. If Your Old Application Used A Terminal Screw, You Will Need To Use The 3/16" Adaptor Terminal That Is Included with This Gas Valve. Note: Does Not Apply To 700-502, 700-504, 700-506 and 700-511 Which Have The Coaxial Connection.Will Accept Both Types Of Thermopiles (Coaxial or 2-Lead). Use 1751-003 To Convert Valves To Natural Gas. Use 1751-013 To Convert Valves To LP Gas.
Will Only Work with Two-Lead Thermopiles (Unless Otherwise Noted)
Pressure Regulator Conversion From Natural To LP (1751-013). LP To Natural (1751-003).
Excellent Replacements For Gas Valves.. Use The Competitive Gas Valve Cross-Reference
Electrical Rating 250 Mv To 750 Mv Operating Range
Pressure Regulator (Optional By Model) Factory Set @ 3.5" W.C.