Robertshaw - 10-612 - Automatic Reset Limit

Item Number: ROB10612  MFR Part Number: 10-612


Automatic Reset Limit
see more


Automatic Reset Limit
  • The Robertshaw Lc Series Limit Control Is Designed For Any Appliance Where Temperature Protection Is Needed. All Lc Series Controls Are Non-Adjustable, Factory Calibrated, and Feature Negative Biased Power Element Diaphragms.
  • The Lc Series Is A Proven Safety Control For Commercial and Specialty Applications. They Are Available In Automatic or Manual Reset Versions with Temperature Settings From 340║F To 600║F (170║C To 316║C).
The 5225 Series Automatic Reset or Cycling Models Do Not Have A Reset Button and Feature SPDT Switch Action. Should The Temperature Exceed The Control's Fixed Setting, The Normally Closed (N.C.) Contacts Will Open. At The Same Time The Normally Open (N.O.) Contacts Will Make, and Could Be Used To Signal The Over-Temperature Condition If So Desired. Temperature Must Drop Approximately 25 °F Before The Normally Closed Contacts Will Reset. U.L File Number E12103.Features and BenefitsCalibrated Temperature Settings 340║F To 600║F In 5║F Increments (170║C To 316║C)Bulb and Capillary Assemblies Available In Copper,Nickel Plated Copper or Stainless SteelAvailable In Manual Reset or Automatic OperationControl Function Is Designed To Interrupt Power In The Appliance Circuit At The Calibrated TemperatureAutomatic Actuation Of The Control Switch At or Below The Calibrated Temperature If The Pressure Integrity Of The Thermal Element Is Compromised

California residents: see Proposition 65 Warning

Weight0.05 Pounds (Lb)
Width1 Inches (In)
Height1.75 Inches (In)
Country of OriginMEX
Length2 Inches (In)