DetailsSS610E Is Specially Designed For Use In Mini Split Systems. Its Small Sensor Can Easily Fit In the Confined Internal Spaces Of Most Units. It Can Also Be Installed Directly In the Drain Pan or Clipped To the Unit's Coils. SS610E's CPU Unit Is Housed In An Attractive Casing That Can Be Mounted Directly To the Side Of the Unit. Uses Power From A/C Unit So No Batteries Are Required.the Electronic Condensate Overflow Switch Contains Low Power Consuming, State-Of the-Art Microelectronics. SS610E's Logic Circuit Continuously Samples the Probes For Water. If Water Is Detected, the Circuit Determines If the Condition Is Transient or Permanent. If Permanent, the System Will Be Shutdown. Onboard LED's Indicate the Condition Of the Unit.
California residents: see Proposition 65 Warning
Weight 1.16 Pounds (Lb) Width 2.25 Inches (In) Height 8.125 Inches (In) Country of Origin CHN Length 5.5 Inches (In) Brand Rectorseal® Tier Safe-T-Switch® Voltage 0 to 250 Volts AC Maximum Amps Running 5 Shelf Life NA Cord Length 2' lead, probe 4' Application Designed for mini split systems, for installation directly on primary drain pan or clipped to coils above primary drain pan. Multi-voltage. Can be wired in both normally opened and normally closed systems. Approvals UL 508 listed Color White Composition Polyvinyl Chloride Connection Size None For Use With Mini split systems Functions Condensate Overflow Cut Off Switch Load Capacity 0 to 250 Volts AC, 5A, 1250VA; 0 to 30 Volts DC, 5A, 150W Mounts Primary Drain Pan or Clipped to Coil Above Primary Drain Pan Plenum Rated No Size 2.5" x 1.4" x 1" Standards None Switch Type LED Indicator Type Electronic Wire Gauge 18 AWG UL Listed Yes UL Recognized Yes