Paragon - 695-003 - Electronic Blower Control Circuit Board

Item: ROB695003
MFG: 695-003
Loading price
/ EA
Loading Inventory
Electronic Blower Control Circuit Board


The Robertshaw 695 Series Electronic Blower Motor Controls Were Designed For Use On Heating and Cooling Equipment. The 695 Controls The Operation Of The Induced Draft Blower and The Circulating Blower In All Thermostat Modes. On A Call For Heat, The Induced Draft Blower Is Energized. A Pressure Switch Then Proves The Induction Blower Is Functioning and Brings In The Gas Valve. Operation Of The Gas Valve Starts The "On" Delay Timing. At The End Of A Pre-Selected (And Fixed) Delay, The Circulating Blower Is Energized and It Runs Continuously Until The Call For Heat Is Satisfied. At This Time, The "Off" Delay (Adjustable) Is Initiated and The Circulation Blower Operates Until The "Off" Delay Times Out.
  • Oem For Rheem
  • Input Voltage 115Vac 60 Hz.
  • Control Voltage 18-30 Vac Replaces 47-22827-01, 47-22827-81, 47-22827-82, 47-22828-01, 47-22828-02
  • Blower Heating On 20/120 Off Time
  • Ambient -40 To 176F
  • Input Voltage115 Vac, 60 Hz
  • Control Voltage18-30 Vac
  • Inducer Current2.5 Fla, 3.5 Lra @ 110/120 Vac, 1.5 Fla, 1.75 Lra @ 220/240 Vacblower Current11.0 Fla, 24.5 Lra @ 110/120 Vac, 11.0 Fla, 24.5 Lra @ 220/240 Vacambient Temperature Rating-40 To 176 °F Humidity95% Non-Condensing

California residents: see Proposition 65 Warning

Features and Specification

Length 0.2500
Height 6.0000
Cubic Measurement 0.0035
EAN 0662013778453
UPC 662013778453
Width 4.0000
Weight 0.2000
Brand Robertshaw