Mortex - 88-1208-54D - 4+ Ton Electric Blower for Nordyne

Item: MOR88120854D
MFG: 88-1208-54D
loading availability
Loading price
/ EA


M.H. Blower Package
Designed for M.H. Furnaces 1 1/2 - 4+ Tons


These conversion blower packages are designed for converting Manufactured Housing Gas or Electric Furnaces for cooling. When using these blower packages the furnace is ready for split system air conditioning. The 87/88-1008 is capable of handling up to 3 1/2-4 tons and the 87/88-1208 is capable of handling up to 4-4 1/2 tons nominal air conditioning if the duct work is adequately sized. Package consists of one carton that contains the 110 volt bower assembly (87-) or 230 volt blower assembly (88-) with or without 40VA control box wired for either 2 wire or 4 wire controls together with proper electrical harnesses and required adapter plates for either NORDYNE or COLEMAN mobile home furnaces. These units are P.F.S. approved per HUD guidelines.

The 87/88-1208 Large Blower has the following benets:
Helps overcome duct problems during the manufacture of the home. Increased air ow increases BTU performance of air conditioners and heat pumps. Allows the applications on some 5 Ton condensing units on mobile home gas furnaces. Gives better performance in doublewide applications. This blower was specically designed for doublewides, triplewides, (3 duct systems) and for duct systems with lateral takeos for perimeter cooling. Perimeter cooling has become much more prevalent today.

California residents: see Proposition 65 Warning

Features and Specification

Weight 25.000000
Rotation Counter-Clockwise
Phase Not defined
Length 18.000000
UL Recognized No
UL Listed No
Voltage 230 VAC
Warranty Offered Yes
Width 12.000000
CFM 1130-1600
Brand Mortex
Blower Wheel 11" x 8"
Blower Motor Type PSC (Permanent Split Capacitor)
Blower Motor Speeds 3 (Three)
Blower Motor RPM 1175
Blower Motor HP 3/4 HP
Amps 0
Bore Diameter Not defined
Cubic Measurement 1.500000
Height 12.000000
Cycle/Hertz 50/60 Hz
ETL Listed No