DetailsTightens quickly from the front with a Phillips head screwdriver. Has a durable brass interior shielded by nylon exterior to prevent shorting.
Most technicians have encountered the problem of a compressor with pitted or severely corroded spade terminals. The start-up current surge of repeated hot summer cycling eventually destroys the spade connector, sometimes leaving nothing but a corroded round post.
Mainstream has developed a patented product, QwikLug™, to solve this problem. QwikLug™ easily attaches to damaged or corroded spade connectors. We have considered the difficulty in these field installations - the lack of space around these spade terminals - and have developed a solution. Simply push the QwikLug™ connector on and tighten it from the front with a Phillips screwdriver. QwikLug™ comes with color coded leads for connecting to existing wiring (Leads not included with QT2800). The outer connector housing is a nylon insulator so the connectors can touch without shorting.
- QT2800 - 3 Lugs / Male Spades / NO Wire
- QT2810 - 10 AWG / 2 ft. Leads with nut
- QT2812 - 12 AWG / 2 ft. Leads with nut
- QT2910 - 10 AWG / 4 ft. Leads with spade
- QT2912 - 12 AWG / 4 ft. Leads with spade
California residents: see Proposition 65 Warning
Weight 0.2 Pounds (Lb) Width 7.125 Inches (In) Height 10 Inches (In) Country of Origin USA Length 1.25 Inches (In) Brand Mainstream Engineering Tier QwikLug® Voltage 100-120/200-240 VAC Cycle/Hertz 50 Cycle/Hertz 60 Maximum Current 30 Application HVACR Compressors Connection Type Nut Lead Length 4 Feet Wire Gauge 10 AWG