K-Flex - 800-374-GAL - 374 Outdoor Protective Coating, Gallon

Item: 800374GAL
MFG: 800-374-GAL
Loading price
/ GA
Loading Inventory
Outdoor Protective Coating, Gallon


K-FLEX® 374 Protective Coating

K-FLEX® 374 Protective Coating is a water-based coating specially formulated for application to elastomeric insulation surfaces. Fast drying and white in color, this protective coating offers UV resistance and is ideal for indoor and outdoor applications.K-FLEX® 374 Protective Coating is available in gallon containers.

K-FLEX® 374 Protective Coating can be applied with a brush or short-nap roller, or sprayed. For best appearance, two coats are recommended. It should be stirred thoroughly and applied to a clean, dry surface which is free of dirt, oil, or other contaminants. If the surface needs cleaning, use a fast-drying non-residue cleaner such as denatured alcohol. The coating should be applied above 50°F and allowed to dry for 1 hour between coats, or the adhesion may be adversely affected.

See Technical Bulletin TA1 for equipment recommendations.

Do not add water to the product; thinning with water will adversely affect the coating. Use fresh, clean water for clean up.

K-FLEX® 374 Protective Coating offers a tough, cleanable surface for indoor applications. The decorative coating can be tinted with common pigment pastes used for tinting latex paint. Pigments should be added at the rate of less than 4.3 oz/gal. The coating is free of any solvent odors.

K-FLEX® 374 Protective Coating offers protection from the harmful effects of UV rays when applied to insulation outdoors. It should not be confused as a waterproof mastic, and should not be used in areas where water ponding could occur.

Caution: Use with ventilation and do not take internally. If swallowed, do not induce vomiting - call physician immediately. Avoid contact with eyes.In case of eye contact, flush with large amounts of water and call physician. Close container after use.Keep out of reach of children.

California residents: see Proposition 65 Warning

Features and Specification

Green Environmental Attribute Saves Energy
For Use With K-Flex Insulation System
Includes Product and technical support
Functions Thermal Insulation
Brand K-Flex
Composition Outdoor protective coating
Coverage 40 ft²/gal per coat
Flame/Smoke Rating ASTM E84 - 25/50
Dry Time 1 hr touch; 24 hrs through
EAN 0841999158651
Temperature Range -297°F to 220°F (-182.7°C to 104.4°C)
Tier 374
Type Gallon
UPC 841999158651
UV Resistant No
Package Height 14.0000
Package Length 14.0000
Package Weight 31.0000
Package Width 8.0000
Service Temperature >220°F (104.4°C)
Shelf Life 12 months
Application Temperature 40°F to 100°F (4.4°C to 37.7°C)
Application HVAC / Refrigeration


picture_as_pdf data sheet

picture_as_pdf msds sheet

picture_as_pdf safety data sheet

picture_as_pdf specification sheet