ICP - RHH - R410A Single Package Rooftop Heat Pump 3 - 10 Ton

Grouped product items
Product Name
No options of this product are available.
/

Skip to

Description

HIGH EFFICIENCY PACKAGE HEAT PUMPS
R-410A SINGLE PACKAGE ROOFTOP 3 - 10 TONS (1 & 3-Phase)
BUILT TO LAST, EASY TO INSTALL AND SERVICE
  • ASHRAE 90.1 Energy Compliant and Energy Star qualified
  • SEER’s up to 15.8, EER’s up to 12.8
  • IEER’s up to 13.0 with single speed indoor fan motor
  • IEER’s up to 13.7 with 2speed/VFD indoor fan motor
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Convertible from vertical to horizontal airflow for slab mounting. Supply duct kit required for 120 size models.
  • Copper tube aluminum fin coils with optional corrosion resistant coils
  • Pre-painted exterior panels and primer coated interior panels tested to 500 hours salt spray protection
  • TXV refrigerant metering system on each circuit
  • Cooling operating range up to 125ºF (52ºC) and down to 30ºF(1ºC)
  • Solid-state control board and easy access terminal board
  • Refrigerant filter drier and accumulator on each refrigerant circuit
  • Automatic changeover when used with auto-changeover thermostat
  • Rated in accordance with AHRI Standards 210/240 (036-060) and 340/360 (072-120)
  • Designed in accordance with Underwriters' Laboratories Std1995
  • Listed by UL and UL, Canada or ETL, ETL Canada
  • Access panels with easy grip handles
  • Innovative, easy starting, no strip screw features on unit access panels.
  • Two inch disposable return air filters
  • Tool-less filter access door
  • Belt drive evaporator fan motor and pulley combinations available on all three phase sizes to meet any application
  • Direct Drive X13 (5 speed/torque) indoor motor on 036-060models
  • New terminal board facilitating simple safety circuit troubleshooting and simplified control box arrangement
  • Thru the bottom power entry capability standard
  • Single point electric connections
  • Full perimeter base rail with built in rigging adapters & fork truck slots
  • Scroll compressors with internal line break overload protection
  • Dependable Time / Temperature defrost board and logic
  • 24 volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator fan motor
  • Totally enclosed condenser motors with permanently lubricated bearings
  • Loss of charge, freeze protection, and high pressure switches
FACTORY OPTIONS INCLUDING BUT NOT LIMITED TO:
  • 115 volt convenience outlet (Non-powered)
  • Non-fused disconnect switch
  • Economizer with db, enthalpy or CO2 control options
  • Corrosion resistant coil options for evaporator and condenser
  • Multiple indoor fan motors for expanded airflow capability (3ph)
  • Accessory electric heat (field installed option only)
  • Smoke detectors – Supply Only
  • Hinged access panels
  • 2 Speed indoor fan motor with VFD controller on 090 to 150 size models
  • Standard and Ultra low leak economizers available.
LIMITED WARRANTY
  • 5 Year compressor limited warranty
  • 1 Year parts limited warranty

California residents: see Proposition 65 Warning