ICP Parts - EBAC03NCB - Sub-Base Downflow Kit 36,42,48

INTRODUCTION

This instruction covers the installation of downflow base kits on models FCM, FVM, FEM, FSM, REM, WAH, WAP, WAX, EBP, EBX, EBV and EBW fan coils. (See Table 1) The device is designed to provide a means of eliminating open passage through building structure (per UL and NFPA 90B), and provides a 1 in. clearance between plenum and initial penetration of structure.

DESCRIPTION AND USAGE

The downflow base kit is required in downflow installations of fan coils. The kit maintains 1 in. minimum clearance between unit discharge plenum, ductwork, and combustible materials and also provides a gapfree seal with the floor. Before installing the downflow base, convert the fan coil unit for downflow installation by positioning unit with filter section at top and rotating coil 180 degrees. See downflow bracket kit Installation Instructions for details.