DetailsRf Equipment Interface Module Controls Up To 3 Heat/2 Cool (Heat Pump) or Up To 2 Heat/2 Cool (Conventional) System When Used with Wireless Focuspro Thermostat. Easily Relocate Thermostat or Upgrade Equipment without Running New Wires Using This Module and A Wireless Focuspro Thermostat. Powered By Redlink Reliability; No Interference with Other Wireless Devices In The Home. Works with Th6320R1004 or Th5320R1002 Wireless Focuspro Thermostats. Input For Return Air Sensor. Quick-Connect Terminal Blocks. Leds For Power and System Status. Use with Gas, Oil, Electric, Heat Pump, Forced Warm Air, Hot Water, Steam or Gravity. Dimensions: 8-1/8" High" x 8" Wide" x 1-7/8" Deep (206mm High" x 203mm Wide" x 47mm Deep). Equipment Interface Module Is Also Available In Kits. Electrical Ratings: 18- To 30-Volt (Ac), 50/60 Hz. Operating Humidity Range (% Relative Humidity-Rh): 5 To 95% Rh, Non-Condensing. Operating Temperature Range: -40F To 165F (-40C To 73.9C). Color: Gray. Parts Needed For Operation (Not Included): Th6320R1004 or Th5320R1002 Wireless Focuspro Thermostat.
California residents: see Proposition 65 Warning
Weight 1.3 Pounds (Lb) Width 8 Inches (In) Height 8.125 Inches (In) Country of Origin MEX Length 1.875 Inches (In) Brand Honeywell Voltage 18-30 VAC Electrical Rating 18 to 30 VAC, 50/60 Hz Stages Cool 2 Stages Heat 2 Application Gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity Color White Comments/Notes Equipment Interface Module is also available in kits Operating Temperature Range -40°F to 165°F (-40°C to 73.8°C) Terminal Designations C, R, Rc, Rh, W-O/B, W2-Aux/E, Y, Y2, G, L, RAS Warranty Offered Yes