Honeywell - S8910U1000 - Direct spark ignition Control, one- or two-rod

Item Number: HONS8910U1000  MFR Part Number: S8910U1000/U


Direct Spark Ignition Control, One- or Two-Rod
see more


Direct Spark Ignition Control, One-Rod, Two-Rod. Universal Hot Surface Ignition Module Replaces Multiple Field-Installed Hot Surface Ignition Modules Supplied By Honeywell, White-Rodgers, Robertshaw and Johnson. Uses 120-Volt (Ac) Igniter. Includes Instructions and Accessories For Easy Replacement. For 120-Volt (Up To 5.0-Ampere) Surface Igniter (Norton 201/271 or Equivalent). For Local (Single Rod) or Remote (Dual Rod) Rectification Type Flame Sensing. Contains Easy-To-Use Instructions Plus Accessories Required To Adapt Existing Hot Surface Ignition Module. Provides One or Three Ignition Trials (Four-Second or Seven-Second Trials) Per Call For Heat; Prepurge Of 32 Seconds or Less; Up To 96 Seconds Between Purge Trial Times. Temperature Range Is -40 To +175F (-40 To +79C). Ignition Sequence: Number Of Trials For Ignition and Trial Time Is Determined By Selection Tab. If Selection Tab Is Not Installed, Module Will Operate At Four Seconds Trial Time and One Ignition Trial.

California residents: see Proposition 65 Warning

Weight0.65 Pounds (Lb)
Width4.2 Inches (In)
Height2.4 Inches (In)
Country of OriginMEX
Length5.6 Inches (In)
VoltageNot Provided Before Item Discontinued
Ignition TypeNot Provided Before Item Discontinued
ApplicationNot Provided Before Item Discontinued
Connection TypeNot Provided Before Item Discontinued
Gas TypeNot Provided Before Item Discontinued
Temperature RatingNot Provided Before Item Discontinued
Warranty OfferedYes