Honeywell
Honeywell - M9174C1025 - Non-spring return motor for Modutrol motor, 75 lb./in torque, 120V
Item: HONM9174C1025U
MFG: M9174C1025/U
loading availability
Loading price
Description
Non-Spring Return Actuator, 75 lb./Inch Torque Rating, 120-Volt Series 90 Modutrol Iv Motor. Modulating Proportional Control Motor To Be Used with Controllers That Provide A Series 90 Output To Operate Dampers or Valves. Integral Junction Box Provides National Electrical Manufacturers Association (Nema)-3 Weather Protection If Motor Is Mounted In The Upright Position. Motor and Circuitry Operate From 24-Volt (Ac). Quick-Connect Terminals Are Standard; Screw Terminal Adaptor Is Available. Adaptor Bracket For Matching Shaft Height Of Older Motors Is Available. Motors Have Field Adjustable Stroke (90 To 160°). Integral Auxiliary Switches Are Available Either Factory Mounted, or Can Be Field-Added. All Models Have Dual Shafts (Slotted and Tapped On Both Ends). All Models Have Auxiliary Switch Cams. Fixed Torque Throughout The Entire Voltage Range.
California residents: see Proposition 65 Warning
Features and Specification
Weight | 7.35 |
---|---|
Brand | Honeywell |
Cubic Measurement | 0.3146 |
Cycle/Hertz | 60 Hz |
Dimensional Weight | 4 |
EAN | 0085267059626 |
Height | 8.25 |
Length | 10.75 |
Phase | Single |
Package Height | 8.25 |
Package Length | 10.75 |
Package Weight | 7.35 |
Package Width | 6.13 |
Prop 65 | No |
Rotation | Clockwise (CW) |
UOM | EA |
UPC | 085267059626 |
Voltage | 120 VAC |
Width | 6.13 |
Country of Origin | USA |
Documents
picture_as_pdf specification sheet