Heil
7.5 Ton 11.2 EER Packaged Heat Pump, 460/3/60, R-410A
Item: RHS090L0AA0AAT
MFG: RHS090L0AA0AAT
Description
PACKAGE HEAT PUMP UNIT
R-410A SINGLE PACKAGE ROOFTOP 3 THRU 12.5 TONS (1 & 3-Phase)
Built to Last, Easy to Install and Service
R-410A SINGLE PACKAGE ROOFTOP 3 THRU 12.5 TONS (1 & 3-Phase)
Built to Last, Easy to Install and Service
- One-piece, single-packaged heat pump units that are prewired, tested, and charged at the factory
- Single stage cooling on 3 to 6 ton models, 2 stage cooling on 7.5 to 12.5 ton.
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
- All units are convertible from downflow to horizontal air flow; no special adapter curbs are necessary on 3 to 10 ton models, supply duct kit required for 12.5 ton model only.
- Copper tube aluminum fin coils with optional corrosion resistant coils
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
- Fixed orifice metering devices on all models to precisely control refrigerant flow
- Outdoor temperature cooling operation range up to 115°F (46°C) and down to 25°F ( -4°C )
- Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
- Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
- Fully insulated cabinet
- Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressor.
- Dependable time/temperature defrost logic provides a defrost cycle, if needed, every 30, 60, 90, or 120 minutes and is adjustable
- Scroll compressors with internal line-break overload protection
- All units have high and low pressure switches
- Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
- Precision sized suction line accumulator to provide high reliability
- 4-way reversing valve rapidly changes the flow of refrigerant to quickly changeover from cooling to heating and heating to cooling
- Belt drive evaporator-fan motor and pulley combinations available on all sizes to meet any application
- Direct drive high efficiency blower motor on 3 to 5 ton models, belt drive optional
- Crankcase heaters on all models but the 3 ton
- Newly-designed indoor refrigerant header for easier maintenance and replacement
- “No-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal.
- Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
- Provisions for thru-the-bottom power entry capability
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Single point electrical connections
- 5 Year compressor limited warranty
- 1 Year parts limited warranty
California residents: see Proposition 65 Warning
Features and Specification
Weight | 885 |
---|---|
AHRI - Usage | Packaged |
Blower Motor Speeds | 2 (Two) |
Blower Motor Type | Fixed Torque |
CBU - Compressor Bearing Unit | Yes |
Circuit Breaker - Max Amps | 20 |
Color | Gray |
Compressor | Scroll |
Condenser Motor HP | 1/4 HP |
Condenser Motor Speeds | 1 (Single) |
Condenser Motor Type | Direct Drive |
Cubic Measurement | 149.8233 |
Cycle/Hertz | 60 Hz |
Drain Connection Size | 3/4 |
Drive Type | Belt |
Energy Star Rated | No |
Equipment Type | Heat Pump |
ETL Listed | No |
Fan Diameter | 22 |
Height | 49.375 |
Length | 88.125 |
Number of Fan Blades | 2 |
OPT Code | 1PRHS090L0AA0AAT |
Phase | Three |
Product Family | RHS |
Prop 65 | Yes |
Stage | Two |
Tonnage | 7.5 |
UL Listed | Yes |
UOM | EA |
UPC | See Optical |
Width | 59.5 |
Evaporator Coil Metering Device | Orifice - Fixed Metering Device |
Blower Wheel Size | 15" x 15 |
Air Flow Direction | Convertible |
Drain Connection Quantity | 2 |
Parts List
Documents
picture_as_pdf warranty document
picture_as_pdf specification sheet
picture_as_pdf installation instructions