Heil - RGH183HDCA0AAT - 15 Ton Gas Heating/Electric Cooling Single Package Rooftop Unit R-410A

loading availability
Loading price
/ EA



Built to last, East to Install and Service
  • One-piece, high efficiency gas heating and electric cooling with a low profile, prewired, tested, and charged at the factory
  • Dedicated vertical or horizontal air flow duct configuration models. No field kits required.
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fully insulated cabinet
  • Two-stage cooling with independent circuits and control on all models
  • Redundant gas valve for two stage gas heating capacity control
  • Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
  • High efficiency, gas heat with induced draft flue exhaust design
  • Scroll compressors on all models
  • All units have high and low pressure switches
  • Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
  • Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; end drain
  • Belt drive evaporator-fan motor and pulley combinations available to meet most applications
  • Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressors.
  • “No-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal.
  • Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
  • Standard outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • TXV metering devices on all models to precisely control refrigerant flow
  • Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
  • Capable of thru-the-base or thru-the-curb gas line routing
  • Single point gas and electrical connections
  • 15 Year limited warranty on optional stainless steel heat exchanger.
  • 10 Year limited warranty on aluminized stainless steel heat exchanger
  • 5 Year compressor limited warranty
  • 1 Year parts limited warranty

California residents: see Proposition 65 Warning

Features and Specification

Weight 1892.000000
Product Family RGH
Prop 65 Yes
Refrigerant R-410A
Height 49.375000
Length 127.875000
Phase Three
Number of Fan Blades 3
UL Listed Yes
Sound Level (dBA) 84.1
AHRI - Usage Packaged
Gas Connection Size 3/4" [19.05 mm] N.P.T.
Evaporator Coil Metering Device TXV/TEV - Thermostatic Expansion Valve
Stage Two
Thermal Efficiency 81%
Tonnage 15
UPC See Optical
Voltage 208-230 VAC
Width 86.375000
Heating Capacity 176000-260000
Color Gray
CFM Cooling 4500-7500
CFM Condenser Fan 1100
CBU - Compressor Bearing Unit Yes
Brand Heil
Blower Wheel 15" x 15"
Blower Motor Type PSC (Permanent Split Capacitor)
Blower Motor RPM 514-680
Blower Motor HP 2 1/5 HP
Air Flow Multi-Position
Circuit Breaker - Max Amps 100
Blower Motor Speeds 2 (Two)
Compressor Scroll
Condenser Motor HP 1/4 HP
Filter Size 6 - 20" x 25" x 2"
Fan Diameter 22
ETL Listed Yes
Equipment Type Gas Electric
Energy Star Rated Yes
EER 11.5
Drive Type Belt
Cooling Capacity 174000
Condenser Motor RPM 1100
Drain Connections 2
Condenser Motor Type PSC (Permanent Split Capacitor)
Condenser Motor Speeds 1 (Single)
Cubic Measurement 315.600100
Cycle/Hertz 60 Hz
Drain Connection Size 3/4"