Fieldpiece - ATS1 - Disk K-Type Thermocouple for Flat Surfaces

Item Number: FIPATS1  MFR Part Number: ATS1


Disk K-Type Thermocouple for Flat Surfaces
see more


The ATS1, K-Type Thermocouple Is Great For Measuring The Temperature Of Flat Surfaces. The Disk Tip On The Thermocouple Is Designed To Establish Good Thermal Contact. There's No Better Way To Measure A Flat Metal Surface Than The ATS1. Infrared Gets A Close Temperature Measurement But The ATS1 Is More Accurate.
Fiberglass Insulation Withstands High Temperatures Up To 900 °F. The ATS1 Can Be Used with Any Of Our Meters That Measure Temperature and Any Thermometer Accepting A K-Type Thermocouple.

  • Accuracy: +/- 4 °F (2 °C) ; 1 °F (0.5 °C) After Field Calibration, 32 To 176 °F (0 To 80 °C)
  • Temperature Range: -50 To 900 °F (-46 To 482 °C)
  • Thermocouple Conductors: K-Type Nickel Chromium/Nickel Aluminum.
  • Probe Insulation: Calibration and Atmosphere Will Affect Maximum Useful Temperature In Applications.
  • The Fiberglass Wire Insulation Is Designed To Withstand A Maximum Continuous Use At 900 °F (482 °C).Plug: K-Type Thermocouple Male Mini Plug.
Weight1.5 Pounds (Lb)
Width4 Inches (In)
Height0.5 Inches (In)
Country of OriginTWN
Hazardous MaterialNo
EPA Cert RequiredNo
Length6 Inches (In)
Includes CaseNo
FeaturesK-Type Thermocouple
For Use WithThe ATS1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple