DetailsThe Model ST Series Panels Are For Single Stage Heating and Cooling with Manual Changeover. Zone 1 Is The "Master" Zone Which Controls The Heating and Cooling Mode and Also The Fan Operation.
The St-2 Is A 2 Zone Panel and The St-3 Is A 3 Zone Panel. Zones 2 and 3 Will Only Operate In The Same Mode That The Zone 1 Thermostat Is In. Each Thermostat Can Turn The System "On" and "Off ", But Only In The Same Mode. It Is Recommended The Zones 2 and 3 Have No Switching Subbases For The Thermostats. The St Panels Can Be Used with Mechanical or Digital Programmable Thermostats That Are Non-Power Stealing. Open-Close Switches On The Control Panels Near The Damper Terminal Blocks Allow For Continuous Air Circulation. This Switch Controls The Damper Position When The Heating and Air Conditioning System Is At Rest. The St Panels Can Be Wired Together To Create Larger Zoning Systems Up To 6 Zones .
California residents: see Proposition 65 Warning
Weight 2.5 Pounds (Lb) Width 13 Inches (In) Height 3 Inches (In) Country of Origin USA Length 13 Inches (In) Brand EWC Controls Voltage 24 VAC Amps 0.002 Zone Capability 2 Zones Auto Changeover No Display No Display Options None Heat Pump Compatible No Ambient Temperature Range -20°F to 160°F (-28.8°C to 71.1°C) Color Clear, Green Composition Plastic Emergency Heat Switch No Individual Fan Control No Maximum Temperature 145°F (62.7°C) Network Zoning No Number of HVAC Zones 2 Warranty Offered Yes UL Listed No UL Recognized No Cycle/Hertz 60 Phase Single