DetailsThe EBD (Electronic By-Pass) Style Are Self-Contained Units That Give You The Static Control Mounted To The Damper. It Is An "All-In-One" Design That Makes The Installation Process Much Easier Than Most Electronic By-Pass Dampers. The Static Pressure Can Be Adjusted In The Field Between 0.5" To 4" Of Pressure. This Is Done By The Turn Of A Set-Screw. Requires 24Vac To Operate. Tubing and Pitot Tube Are Included.
California residents: see Proposition 65 Warning
Weight 12.4 Pounds (Lb) Width 18 Inches (In) Height 18 Inches (In) Country of Origin USA Length 18 Inches (In) Brand EWC Controls Voltage 24 VAC Amps 1.5 Power Method 24 Volt Phase Single Cycle/Hertz 50 Cycle/Hertz 60 Damper Type By-Pass Damper Heat Pump Compatible Yes Ambient Temperature Range -20°F to 160°F (-28.8°C to 71.1°C) Color Silver Composition Steel Connection Type T' Block Emergency Heat Switch No Individual Fan Control No LEDs Yes Maximum Temperature 185°F (85°C) Mounting Crimped edge Network Zoning Yes Shape Round Size 14" Type Motorized Modulating Bypass Warranty Offered Yes UL Listed No UL Recognized No