Emerson Climate - ZS38K4E-PFV-950 - Aftermarket Hermetic Scroll Compressor, 208-230/1/60, Polyol Ester Oil (POE)

Item: ZS38K4EPFV950
MFG: ZS38K4E-PFV-950
loading availability
Loading price
/ EA


The Copeland Scroll Outdoor Condensing Unit was designed based on three factors demanded by industry users:

Energy Efficiency
Utilizing scroll compressor technology, variable speed fan motors, large capacity condenser coils and advanced control algorithms to optimize fan speed, energy consumption is significantly reduced. Compared to hermetic reciprocating units, end-users will save more than $350 in annual energy costs.
Combining the proven reliability of Copeland Scroll compressors with advanced CoreSense Diagnostics, equipment reliability is greatly enhanced. Fault code alerts and fault code retrieval capabilities provide information to help improve speed and accuracy of system diagnostics. Integrated electronics provide protection against over-current, over-heating, incorrect phase rotation, compressor cycling, high pressure resets, low pressure cut-outs and liquidflood-back conditions that cause unexpected performance losses or worse, unplanned equipment failure.
The slim shape and light weight make the Copeland Scroll Outdoor Condensing Unit aesthetically appealing and eases the installation process. The ultra quiet variable-speed fan motor significantly reduces exterior sound levels, allowing additional location flexibility. Combined with optional wall mounting capability, they deliver unmatched flexibility. Copeland Scroll Outdoor Condensing Units are perfectly suited for walk-in cooler and freezer applications. All units integrate the many benefits of scroll compressor technology, fan speed control and CoreSense Diagnostics. The integration of these technologies deliver higher energy efficiency and lower sound levels, while ensuring reliable performance and operation in foodservice applications. Plus, all units feature variable-speed PSC fan motors that meet or exceed all national standards.

Standard Features
  • Pre-painted enclosures for corrosion protection.
  • Electronic defrost control with programmable defrost scheduling.
  • Brass service valves located externally for easy access.
  • Electronic low pressure control for quick set-up and higher accuracy.
  • Receivers with pressure relief valve, liquid shut-off valve and charging port.
  • Easy to read moisture indicator.
  • Variable-speed PSC fan motors.
  • Advanced CoreSense Diagnostics.
  • Over-sized condenser coils with additional fin corrosion protection for coastal zones.
  • Light weight, slim-line profile for maneuverability and ease of installation.
  • All units are factory tested for braze joint leaks, wiring connections, electrical continuity and start-up performance.
  • Oil seperator and accumulator standard on low temperature models.
  • Heated insulated receiver for low-ambient operation.

California residents: see Proposition 65 Warning

Features and Specification

Weight 80.000000
Refrigerant R-134a; R-404A; R-410A
Prop 65 Yes
Protection Internal
Phase Single
Mounting Dimensions 7.50" x 7.50" x 17.17"
Oil Charge Initial 64 oz.
Oil Charge Recharge 60 oz.
Oil Type Polyol Ester (POE)
Return Gas Temperature 65°F (18.33°C)
Overload Type Internal
Compressor Housing Hermetic
Maximum Voltage 240 VAC
Width 10.130000
UL Listed No
Suction Line Size (OD) 7/8"
Compressor Type Scroll
Voltage 208-230 VAC
Suction Line Fitting Sweat or Braze
Cycle/Hertz 60 Hz
Crankcase Heater 918-0043-00, 918-0043-01
Brand Copeland
Base 7 1/2" x 7 1/2"
Application Ref EM
Amps 44.5
Cubic Measurement 0.976700
BTU Output 19600
High Locked Rotor Amps 169
Discharge Connection 1/2"
Mass Flow 396 lbs./hr; 760 lbs./hr
Length 9.670000
Height 17.230000
Evaporating Temperature 45°F (7.22°C)
Features Scroll Compressor, Displacement (in^3/Rev) 5.04, Displacement (ft^3/hr) 612.50, 5 HP, 44.5 MCC Amps, 3500 RPM