Duro Dyne

Duro Dyne - 8233 - RS356 - 1 Spring Bearing, 1 Solid Bearing, 1 Washer, Handle and Wing Nut

Item: DDY8233
MFG: 8233
Loading price
/ PK
Loading Inventory
RS356 - 1 Spring Bearing, 1 Solid Bearing, 1 Washer, Handle and Wing Nut



Is An Inexpensive, Rattle-Free Regulator For Quick Installation On Balance or Splitter Dampers. It Is Formed From Rust-Resistant, Heavy Gauge, Galvanized Steel and Installs In Seconds. The RAPIT™ Will Penetrate and Secure To Round or Rectangular Damper Blades Up To 24 Gauge Steel. It Has A Fully Retractable Bearing Of Zinc Alloy, Threaded To Accept A 5/16-18 Wing Nut and A Handle That Indicates The Damper Position. It's As Easy To Use As 1-2-3.
  1. Slip The Bearing Over The Edge Of The Damper At The Bearing Line.
  2. Lay The Assembly On Any Firm Surface and rap The Prong with A Hammer. One Blow Drives The Prong Through The Damper Blade, Holding It Securely To The Damper.
  3. When Hit with A Hammer, The Prong Will Automatically Form Up Tight By The Anvil, Which Is Built Into The Bottom Of The RAPIT™ Bearing.

California residents: see Proposition 65 Warning

Features and Specification

Height 11.0000
Gauge Not Provided
Galvanized Yes
Finish Not Provided
EAN 0797582034331
Dimensional Weight 7.0000
Brand Duro Dyne
Cubic Measurement 0.5793
Composition Not Provided
Size Not Provided
UPC 797582034331
Width 7.0000
Length 13.0000
Package Height 11.0000
Package Length 13.0000
Package Weight 12.0000
Package Width 7.0000
Weight 12.0000