Duro Dyne - 15164 - PPP10x3/4 - 5/16" Head x #10 x 3/4" 3,000 Pack, Self-Drilling and Self-Tapping Screw

Item Number: TP1034DP3MP  MFR Part Number: 015164

PRODUCT HIGHLIGHTS

PPP10x3/4 - 5/16" Head x #10 x 3/4" 3,000 Pack, Self-Drilling and Self-Tapping Screw
see more
Loading...
OR
Description

Details

Several common methods such as rivets, screws, and spot welding are used to fasten materials to ductwork. Three types of screws are most often used. The first is self-tapping only and requires a hole to be drilled before the screw can be utilized. The others are both self-tapping but also create their own holes. Self piercing screws have very sharp points which act much like a scratch awl in making a small opening in the steel for the threads to engage and work the sheet metal into a coned threaded hole. These work well for light gage steel.Self-drilling screws have an integral drill point which creates a large hole for tapping. This allows the screws to be used on heavy gages of steel. The maximum total thickness of steel that the self-drilling screw can be used with is determined by the drill point.

Features:
  • Conformance - Meets or exceeds IFI-113 (Revised: August 1, 2007) specifications for Type BSD screws
  • Material - Cold heading quality steel wire
  • Corrosion Resistance - Zinc plated
  • Hardness - Case hardened to Rockwell C52 - 58
  • Head Configuration - Hexagonal unslotted

California residents: see Proposition 65 Warning

Specifications
Weight15 Pounds (Lb)
Width8 Inches (In)
Height7 Inches (In)
Country of OriginTWN
Length7 Inches (In)
BrandDuro Dyne
Documentation

Documentation

Documentation