DiversiTech - QTM-2 - Mac Line Piercing Valve, 1/2", 5/8" OD Tube Size

Item Number: DIVQTM2  MFR Part Number: QTM-2


Mac Line Piercing Valve, 1/2", 5/8" OD Tube Size
see more


MAC-The Ultimate in Line Piercing Valves

Install valve. Connect charging hose. Service. That's all there is to it! MAC features uniport: 1 connection for piercing and servicing. Sealed with refrigerant resistant "O" rings. Needle automatically back seats after servicing, leaving line free of restriction. Connect to tubing with 2 socket-head screws. (Hex wrench is included with each valve.) Needle depressor is inserted into head of needle. Wing cap is turned down easily by hand until line is pierced. Wing cap is removed and system may be serviced with any charging hose with built-in depressor. When hose is removed, spring loaded needle back-seats forming a leak proof seal. Needle depressor is discarded and wing cap forms extra precautionary seal.

California residents: see Proposition 65 Warning

Weight0.2 Pounds (Lb)
Width1 Inches (In)
Height1.5 Inches (In)
Country of OriginCHN
Length2.75 Inches (In)
IncludesHex wrench
ApplicationPiercing and servicing line tap valve
ColorBlack, Silver
Connection Size1/2", 5/8" O.D. Tube Size
Outside Diameter1/2"; 5/8"
Size1/2" O.D., 5/8" O.D.