Comfortmaker®
10 Ton 11.3 EER A/C Package Unit, 460/3/60, R-410A
Item: RAS120L0CA7CAA
MFG: RAS120L0CA7CAA
loading availability
Loading price
Description
ELECTRIC COOLING, R-410A SINGLE PACKAGE ROOFTOP
3 THRU 15 TONS (1 & 3-Phase)
BUILT TO LAST, EASY TO INSTALL AND SERVICE
3 THRU 15 TONS (1 & 3-Phase)
BUILT TO LAST, EASY TO INSTALL AND SERVICE
- One-piece, standard efficiency electric cooling with a low profile, prewired, tested, and charged at the factory
- Field Convertible from vertical to horizontal airflow on all models. No special kit required on 036-150 models. Field accessory supply duct kit required for 180 size model only.
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
- Fully insulated cabinet
- Single-stage or two stage cooling capacity control
- Single or dual scroll compressor with internal line-break overload protection
- All units have high and low pressure switches
- Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
- Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
- Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
- Newly-designed indoor refrigerant header for easier maintenance and replacement
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
- Belt drive evaporator-fan motor and pulley combinations available to meet any application
- Access panels with easy grip handles provide quick and easy access to the blower and blowe rmotor, control box, and compressor.
- “No-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal.
- Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
- Outdoor temperature cooling operation range up to 115°F (46°C) and down to 40°F ( 4°C ) using winter start kit
- Fixed orifice metering devices on all models to precisely control refrigerant flow
- Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
- Standard, medium and high static fan motor options available
- Capable of thru-the-base or thru-the-curb electrical routing
- Single point electrical connections
- 5 Year limited warranty on compressor
- 5 Year limited warranty on electric heater parts
- 1 Year limited warranty on parts
California residents: see Proposition 65 Warning
Features and Specification
Weight | 865 |
---|---|
Blower Motor Speeds | 1 (Single) |
Blower Motor Type | Constant Torque Programmable |
CBU - Compressor Bearing Unit | Yes |
Circuit Breaker - Max Amps | 70 |
Color | Gray |
Compressor | Scroll |
Condenser Motor HP | 1/4 HP |
Condenser Motor Speeds | 1 (Single) |
Condenser Motor Type | Direct Drive |
Cubic Measurement | 149.8233 |
Cycle/Hertz | 60 Hz |
Drain Connection Size | 3/4 |
Drive Type | Belt |
Energy Star Rated | No |
Equipment Type | Straight Cool |
ETL Listed | Yes |
Fan Diameter | 22 |
Height | 49.375 |
Length | 88.125 |
Number of Fan Blades | 2 |
OPT Code | 1PRAS120L0CA7CAA |
Phase | Three |
Package Weight | 900 |
Product Family | RAS |
Prop 65 | Yes |
Stage | Two |
Tonnage | 10 |
UL Listed | Yes |
UOM | EA |
UPC | See Optical |
Width | 59.5 |
AHRI - Usage | Packaged |
Evaporator Coil Metering Device | Orifice - Fixed Metering Device |
Blower Wheel Size | 15" x 15 |
Air Flow Direction | Convertible |
Drain Connection Quantity | 1 |
Documents
picture_as_pdf specification sheet
picture_as_pdf warranty document