Bohn - BMA600SA - 60,000 BTU/h Medium Profile Unit Cooler: Air Defrost (20-230/1/60)

Reference Only

Please contact your Baker rep.


Medium Profile Unit Coolers
Models BMA / Air Defrost * BME/BML / Electric Defrost * BMG/BMF / Hot Gas Defrost

Features & Benefits
  • Schrader valve provided for suction pressure measurement
  • External equalizer connection
  • Heavy-guage textured aluminum cabinet
  • All electrical components factory wired to terminal board and identified, making it easy to field wire the unit
  • Sweat connections to reduce potential for leaks
  • Internal panels are isolated for quiet operation
  • Liquid line solenoid wire harness is factory-installed for quick installation
Drain Pan
  • Front hinged drain pan for easy access
  • Large diameter drain fitting (3/4" ID)
  • Motors plug into wiring harness for easier servicing
  • Single phase EC motors available factory-installed or as a drop-in replacement through InterLink™ Commercial Refrigeration Parts in 115 and 208-230 voltages
  • Thermally protected, lifetime-lubricated single phase PSC motors
Controls Options
  • Quick Response Controller units come factory mounted with an electronic expansion valve, pressure transducer, temperature sensors and control board
  • Beacon II™ units come factory mounted with an electronic expansion valve, pressure transducer, temperature sensors and control board
  • Patented Thermo-Flex™ coil design allows the coil to “flex” during periods of defrost resulting in expansion of the coil surface. By eliminating the possibility of wear at critical stress areas, the integrity and longevity of the unit are dramatically increased (Patent Number 5,584,340)
  • Coil heater slots have been enlarged for easier installation and replacement
  • Electric defrost models have fixed defrost termination / fan delay and heater limit thermostats
  • Reliable nickel steel alloy defrost heater elements
  • Heaters are coil face mounted for easy access
Additional Options
  • Totally enclosed single phase PSC motors available as an option for 208-230 and 460 voltages
  • Factory installed mounted components are available in these configurations: 1. Pre-assembled units come with mounted TXV, liquid line solenoid valve and room thermostat 2.Pre-charged units come with mounted TXV, liquid line solenoid valve, room thermostat, and quick connect fittings 3. Mounted TXV 4. Mounted TXV and solenoid valve 5. Mounted room thermostat
  • Most models available with glycol circuiting (see glycol product brochure)
  • Units available with stainless steel housing and drain pan
  • Units available with Bronze-Glow coil coating (air, electric and hot gas)
  • Units available with copper fins (6 FPI models only)
  • Air defrost units available with polyester coated fins, or various coil coating options
  • Units available with insulated drain pan
  • Ship-loose air sock collar available
  • Wire fan guards for air diffusion
  • Adjustable defrost termination / fan delay thermostat

California residents: see Proposition 65 Warning

Features and Specification

Weight 255.000000
Refrigerant R-404A; R-407A; R-407C; R-407F; R-448A; R-449A; R-507A
Prop 65 Yes
Length 22.875000
Phase Configurable
ETL Listed No
Unit Cooler Defrost Type Air
Unit Cooler Evaporator Style Medium Profile
Suction Line Size (OD) 1 5/8"
Liquid Line Size (OD) 1 1/8"
Height 25.000000
Unit Cooler Type Walk-In
Width 123.312500
Voltage Configurable
UL Listed Yes
Amps 2.8-16
Brand Bohn
Cycle/Hertz Configurable
Energy Star Rated No
Drain Connection Size 3/4"
Cubic Measurement 40.809800


picture_as_pdf specification sheet