Bohn

Bohn - BLV2501H6C - 25 HP Outdoor Condensing Unit: High Temperature (R-404A/507/22) 208-230/3/60

Item: BOHBLV2501H6C
MFG: BLV2501H6C
Reference Only

Please contact your Baker rep.

Description

Air-Cooled Condensing Unit
1/2 - 6 HP Indoor and Outdoor Models

Features & Benefits

Cabinet & Construction
  • Microchannel coil technology standard on all units
  • Painted steel cabinets for superior strength and corrosion protection
  • Heavy duty steel raised base with 1-1/2" legs
  • Fan guards and wiring conduit on indoor models
Serviceability
  • Suction service valves for hermetic and scroll compressors located outside the cabinet for quick installations. Semi-hermetic compressor models have a suction valve on the compressor and an access fitting on the suction line entering the cabinet.
  • Receiver with fusible plug, liquid shutoff valve and charging port is standard
  • Large electrical panel for ease of access
  • Prefabricated wiring harnesses for tight crimp connections and consistent labeling
  • Unit stays on if the hood is removed for servicing
  • Sight glass is easily viewable
Quality
  • All units are completely leak tested in a helium environment, bump tested and allowed to cycle off on the high and low pressure control. Each unit has a copy of the run data shipped inside the electrical panel
  • Electrical circuits are completely checked for continuity
  • Piping is laid out to minimize stress and vibration and is pre-bent to eliminate leaks
  • Encapsulated, auto-reset, high and low pressure controls to eliminate leaks (standard on all high and Mediumium temperature models, adjustable low pressure control standard on low temperature models)
Components
Fan
  • Specifically matched with motor and coil to attain maximum air movement and cooling
Motor
  • Rated for 50 and 60 cycle application
  • Standard PSC or optional Variable Speed EC (VSEC) with Orbus™ Controller
Compressor
  • Wide variety of compressors including: hermetic, semi-hermetic and scroll. R-404A/507 available for both Mediumium and low temperature applications
  • Spring-mounted compressors with vibration eliminators on all 1-1/2 to 6 HP semi-hermetic compressors; 1/2 to 1 HP compressors are rigid mounted and have a discharge loop
  • Discharge service valves come standard on all units including hermetics

California residents: see Proposition 65 Warning

Features and Specification

Weight 1750.000000
Prop 65 Yes
Refrigerant R-404A; R-407A; R-407C; R-407F; R-448A; R-449A; R-507A
Protection Required
Phase Three
Motor Type ECM (Electronically Commutated Motor)
Motor HP 25 HP
Compressor Discus
Liquid Line Size (OD) 1 1/8"
Suction Line Size (OD) 2 1/8"
Voltage 208-230 VAC
UOM EA
UL Recognized No
UL Listed Yes
Type Air Cooled
Width 226.000000
Application Temperature High Temperature
Length 56.000000
Amps 25-30
Brand Bohn
Condenser Motor HP Fractional
Cubic Measurement 329.583300
Height 45.000000
Cycle/Hertz 60 Hz
Full Load Amps 21
Energy Star Rated No

Documents

picture_as_pdf specification sheet