Bohn - BHT025X6C - 2-1/2 HP Outdoor Condensing Unit: Low Temperature Hermetic R-404A (208-230/3/60)

Item: BOHBHT025X6C
Reference Only

Please contact your Baker rep.


Air-Cooled Condensing Unit
1/2 - 6 HP Indoor and Outdoor Models

Features & Benefits

Cabinet & Construction
  • Microchannel coil technology standard on all units
  • Painted steel cabinets for superior strength and corrosion protection
  • Heavy duty steel raised base with 1-1/2" legs
  • Fan guards and wiring conduit on indoor models
  • Suction service valves for hermetic and scroll compressors located outside the cabinet for quick installations. Semi-hermetic compressor models have a suction valve on the compressor and an access fitting on the suction line entering the cabinet.
  • Receiver with fusible plug, liquid shutoff valve and charging port is standard
  • Large electrical panel for ease of access
  • Prefabricated wiring harnesses for tight crimp connections and consistent labeling
  • Unit stays on if the hood is removed for servicing
  • Sight glass is easily viewable
  • All units are completely leak tested in a helium environment, bump tested and allowed to cycle off on the high and low pressure control. Each unit has a copy of the run data shipped inside the electrical panel
  • Electrical circuits are completely checked for continuity
  • Piping is laid out to minimize stress and vibration and is pre-bent to eliminate leaks
  • Encapsulated, auto-reset, high and low pressure controls to eliminate leaks (standard on all high and Mediumium temperature models, adjustable low pressure control standard on low temperature models)
  • Specifically matched with motor and coil to attain maximum air movement and cooling
  • Rated for 50 and 60 cycle application
  • Standard PSC or optional Variable Speed EC (VSEC) with Orbus™ Controller
  • Wide variety of compressors including: hermetic, semi-hermetic and scroll. R-404A/507 available for both Mediumium and low temperature applications
  • Spring-mounted compressors with vibration eliminators on all 1-1/2 to 6 HP semi-hermetic compressors; 1/2 to 1 HP compressors are rigid mounted and have a discharge loop
  • Discharge service valves come standard on all units including hermetics

California residents: see Proposition 65 Warning

Features and Specification

Weight 245.000000
Compressor Hermetic
Protection Internal
Refrigerant R-404A
Phase Three
Motor HP 1/15 HP
Motor Type PSC (Permanent Split Capacitor)
Width 34.000000
Suction Line Size (OD) 7/8"
Warranty Offered No
Voltage 208-230 VAC
Liquid Line Size (OD) 3/8"
Length 44.000000
Application Temperature Refrigeration
UL Recognized No
Type Air-Cooled
UL Listed Yes
Cubic Measurement 19.912000
Brand Bohn
Base 28 1/4" x 37 3/4"
Amps 8.2
Cycle/Hertz 60 Hz
Application Refrigeration
Height 23.000000
Full Load Amps 8.2
Energy Star Rated No


picture_as_pdf specification sheet