AirQuest - RHS090L0AA0AAT - 7.5 Ton Rooftop Heat Pump Package Unit R-410A

Item: RHS090L0AA0AAT
loading availability
Loading price
/ EA



Built to Last, Easy to Install and Service
  • One-piece, single-packaged heat pump units that are prewired, tested, and charged at the factory
  • Single stage cooling on 3 to 6 ton models, 2 stage cooling on 7.5 to 12.5 ton.
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • All units are convertible from downflow to horizontal air flow; no special adapter curbs are necessary on 3 to 10 ton models, supply duct kit required for 12.5 ton model only.
  • Copper tube aluminum fin coils with optional corrosion resistant coils
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed orifice metering devices on all models to precisely control refrigerant flow
  • Outdoor temperature cooling operation range up to 115°F (46°C) and down to 25°F ( -4°C )
  • Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
  • Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
  • Fully insulated cabinet
  • Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressor.
  • Dependable time/temperature defrost logic provides a defrost cycle, if needed, every 30, 60, 90, or 120 minutes and is adjustable
  • Scroll compressors with internal line-break overload protection
  • All units have high and low pressure switches
  • Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
  • Precision sized suction line accumulator to provide high reliability
  • 4-way reversing valve rapidly changes the flow of refrigerant to quickly changeover from cooling to heating and heating to cooling
  • Belt drive evaporator-fan motor and pulley combinations available on all sizes to meet any application
  • Direct drive high efficiency blower motor on 3 to 5 ton models, belt drive optional
  • Crankcase heaters on all models but the 3 ton
  • Newly-designed indoor refrigerant header for easier maintenance and replacement
  • “No-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal.
  • Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
  • Provisions for thru-the-bottom power entry capability
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Single point electrical connections
  • 5 Year compressor limited warranty
  • 1 Year parts limited warranty

California residents: see Proposition 65 Warning

Features and Specification

Weight 885.000000
Product Family RHS
Prop 65 Yes
Refrigerant R-410A
Phase Three
Length 88.125000
Heating Capacity 48000-86000
Height 49.375000
Number of Fan Blades 2
Filter Size (6) 20" x 20" x 2" RA Filter, 20" x 24" x 1" OA Filter
Evaporator Coil Metering Device Orifice - Fixed Metering Device
Width 59.500000
Sound Level (dBA) 82
Stage Two
Voltage 460 VAC
Tonnage 7.5
UL Listed Yes
UPC See Optical
Circuit Breaker - Max Amps 20
Brand AirQuest
CFM Cooling 2250-3750
CFM Condenser Fan 0
CBU - Compressor Bearing Unit Yes
Blower Wheel 15" x 15"
Blower Motor Type Fixed Torque
Blower Motor Speeds 2 (Two)
Blower Motor RPM 460-652
Fan Diameter 22
Air Flow Convertible
AHRI - Usage Packaged
Blower Motor HP 1 1/5 BHP
Color Gray
Drain Connection Size 3/4"
Compressor Scroll
ETL Listed No
Equipment Type Heat Pump
Energy Star Rated No
Electric Heat Range [kW] 13.9-41.7
EER 11.2
Drive Type Belt
Drain Connections 2
Condenser Motor Type Direct Drive
Condenser Motor HP 1/4 HP
Cycle/Hertz 60 Hz
Condenser Motor Speeds 1 (Single)
Condenser Motor RPM 1100
Cooling Capacity 88000
COP 3.4
Cubic Measurement 149.823300

Parts List