3.5 Ton 14 SEER Heat Pump Condensing Unit, 208-230/1/60, R-410A

Item: RP1442FJ1NA
loading availability
Loading price
/ EA


  • R-410A HFC refrigerant.
  • Complete factory charged, wired and run tested.
  • Scroll compressors with internal line break overload and high-pressure protection.
  • Single stage compressor on all models.
  • Convertible airflow.
  • TXV refrigerant metering system.
  • High Pressure and Low Pressure/Loss of charge protection standard on all models.
  • Solid Core liquid line filter drier.
  • Single slab evaporator coil facilitate easy cleaning for maintained high efficiencies.
  • Cooling operation up to 125 degree F ambient.
  • Easily removable filter, blower, gas heat, and compressor/control access panels permits prompt service.
  • Powder Paint Finish meets ASTMB117 steel coated on each side for maximum protection.
  • G90 galvanized.
  • One piece top cover and one piece base pan with drawn supply and return opening for superior water management.
  • Externally mounted refrigerant gauge ports for easy service diagnostics.
  • Easy to install plug-in; slip in, 100% fully modulating economizer. 82% of steady state efficiency.
  • Forkable base rails for easy handling and lifting.
  • Single point electrical and gas connections.
  • High performance belt drive motor with variable pitch pulleys and quick adjust belt system.
  • Permanently lubricated evaporator, condenser and gas heat inducer motors.
  • Condenser motor is internally protected, totally enclosed with shaft down design.
  • 2 inch filter standard with slide out design.
  • Single stage gas valve, direct spark ignition, and induced draft for efficiency and reliability.
  • Tubular heat exchange for long life and induced draft for efficiency and reliability.
  • Solid state furnace control with on board diagnostics.
  • Colored and labeled wiring. Micro Channel coils.
  • Molded compressor plug.
  • Micro Channel evaporators and condenser delivers superior performance with less refrigerant charge and less weight than conventional copper tube/aluminum fin coils. In addition the aluminum design has superior formicary corrosion protection and less potential for leaks due to elimination of tube rubbing potential. Its easier to clean and has a more robust surface.

California residents: see Proposition 65 Warning

Features and Specification

Weight 221
AHRI - Usage Outdoor
Brand Rheem
CBU - Compressor Bearing Unit Yes
CFM 3815
Condenser Motor HP 1/5 HP
Condenser Motor RPM 825
Condenser Motor Speeds 1 (Single)
Condenser Motor Type PSC (Permanent Split Capacitor)
Cooling Capacity 42500
Cubic Measurement 17.7979
Cycle/Hertz 60 Hz
Dimensional Weight 327
EAN 0662021406980
EER 12
Energy Star Rated Yes
Equipment Type Heat Pump
ETL Listed No
Fan Diameter 24
Fins per Inch (FPI) 20
Full Load Amps 1
Heating Capacity 25600-40000
Height 27
HSPF 8.5
Inverter No
Length 33.75
Liquid Line Fitting Type Sweat or Braze
Liquid Line Size (OD) 3/8"
Locked Rotor Amps (LRA) 112
Number of Fan Blades 1
Phase Single
Package Height 35
Package Length 36.38
Package Weight 221
Package Width 36.38
Product Family RP14
Prop 65 Yes
Rated Load Amps (RLA) 17.9
Refrigerant R-410A
Sound Level (dBA) 74.1
Stage Single
Suction Line Fitting Type Sweat or Braze
Suction Line Size (OD) 7/8"
Tier Classic
Tonnage 3.5
UL Listed Yes
UPC 662021406980
Voltage 208-230 VAC
Width 33.75
Maximum Overcurrent Protection (MOCP) 40
Compressor Type Scroll
Country of Origin MEX

AHRI Matchups

Parts List


picture_as_pdf consumer literature

picture_as_pdf consumer literature

picture_as_pdf submittal sheet

picture_as_pdf consumer catalog

picture_as_pdf installation instructions

picture_as_pdf parts list

picture_as_pdf specification sheet

picture_as_pdf use & care instructions

picture_as_pdf warranty document

picture_as_pdf wiring diagrams